Front end mock up

Can you say rails! 2" Raised front bulkhead, adjustable front beam with urethane bushings, dropper spindles with increased caster adjusters and disk breaks, White line sway bar, rack and pinion steering and Bilstien shocks.

droopy draws and more useless accessories...

dropped the rear another outer spline... looks great!! just don't have alot of travel left in the suspension... oh well, i'll have to get some notched spring plates at some point... there's actually still plenty of ground clearance in the back though, with the stock exhaust (i might eventually re-index the rear to somewhere between 1 and 2 splines, but it's good for now)... may have to raise the front up a bit though...

oh, and of course had to add another useless accessory... i like the big fog lights, but i assume they are 12v and oh yeah, they aren't hooked up... but they look cool!!

one spline, ah, ah, ah...

dropped what felt like one outer spline (and measured one according to the angle), but it looked like the spring plate was up kinda high (the spring plate was already over the lip)... so i put everything together to see where it was...

well, it looks like one spline... i'll take it apart again and see if 2 is too low... if it is, i'll play with the inners, outers and the inclinometer till i get it where i want it... hopefully there will be enough travel left in the suspension...

at least the it looks better with the raders on the back... killer rake too!!!

discovered one of the bolt holes on the rear drum is stripped out... guess i'll be getting a new one...